This process is a modification of the process and injection molding extrusi. In Extrusion blow molding, a tube is produced from the extruder and then clamped into the mold (mold) with a cavity larger than the tube diameter. Then the wind blows to fill the cavity. The process usually by blowing a blast of water with a pressure of 50-100 psi. In continuous operation extrusi process with a closed mold around the tube, both the top and bottom closed. Then after spending the cold products made product by ejection. Pipes and tubes made with a continuous blow molding, where the pipe or tube stretched and blown inside the mold.
In the Injection Blow Molding, A short tube (parison) is generated. Dies are then opened and the parison is transferred into a blow molding die. Hot air is injected into the parison, with the spread and fill the cavity. The types of products are bottles and containers.
In a multilayer blow molding is used coextruder tube or parison-parison to form a multi-layer structure. Examples of this type of structure is a multi-layer plastic food and beverage packaging.
(bid / multiple sources)
Kami Arusha Desain merupakan penyedia jasa design Interior Ruang Keluarga dengan beragam konsep yang profesional dan berpengalaman selama puluhan tahun.
ReplyDeleteHarga jasa desain interior yang kita tawarkan murah sangat terjangkau.
Anda sudah tidak perlu menunggu lama dalam proses pengerjaan desain interior 3d Ruang Keluarga ini bisa selesai dalam 2-3 hari kedepan, dengan pengalaman dan kemampuan yang kami miliki, proses pengerjaan desain akan memakan waktu yang lebih cepat.
Hubungi kami sekarang juga, cukup chat via Whatsapp.
Kami selalu berkomitmen dalam mendesain untuk memberikan yang tebaik dan sesuai dengan permintaan klien.
Kami Siap Memberikan masukan dan bantuan permasalahan desain via online.