Sistem Stripper - Ejector

The principle of this system is that the initial release of the product is driven by a stripper and ejectors simultaneously. This system can solve problems of the emergence of large deformation on the product due to stripping of the stripper system or due to the ejection of ejector system above. But in fact this system is mainly used in products where the wall or double wall inner wall has a snap. The principle mechanism of product release. aiming to achieve the distance along the mold opening delimiter pos1, where the stripper plate postal 2 no longer move backwards are other parts of the mold such as male (core) headings 3, 4 male, pos5 support plate, the runner heading pin 6 etc., will continue to move backwards until the composition range of mold. In this position ejector plate and post plate rentainer 7 does not come to move backwards because of the nylon tip shaft 8 which entered the post stripper plate press in post 2. In this position the product has been separated from male post 4, is a wall that has a snap in the end of the ejector pin is still mencengkaram post 9. In a subsequent retreat, nylon ripped from the stripper plate 2 so that the ejector plate post and retainer plate 7 with post-sam ejector pin 9 post interesting in retreat, the product apart from the tip ejector pin post 9. Ejector plate and the retainer plate with ejector pin post 7 post 9 held not come to move backward, it can happen with nylon at the end of the shaft of the post 8. Nylon TSB entered the press with the press can be adjusted by adjusting the bolt conical body. If the bolt rotated to right, in this case the right threaded bolts, then the tuner will sink bolts and nylon will enlarge, press the stripper plate style will grow. This press style that causes the ejector pin go stuck. At the next retreat, ejector plate and the retainer plate 7 will be heading in the push back by the support plate heading 5, where the impetus is greater than the style press nylon, making nylon uprooted from the stripper plate ejector pin which then come to move backward. In addition to nylon, or the opening sequence of movements can also be made of them by wearing jiffy lock.