ISO metric precision hexagon bolts, screws and nuts
are covered by BS 3643 and ISO 272. The standard
includes washer faced hexagon head bolts and full
bearing head bolts. In both cases there is a small radius
under the bolthead which would not normally be shown
on drawings, due to its size, but is included here for
completeness of the text. With an M36 bolt, the radius
is only 1.7 mm. Bolts may be chamfered at 45° at the
end of the shank, or radiused. The rounded end has a
radius of approximately one and one quarter times the
shank diameter and can also be used if required to
draw the rolled thread end. The washer face under the
head is also very thin and for a M36 bolt is only
0.5 mm.
Figure 16.1(a) shows the bolt proportions and Table
16.1 the dimensions for bolts in common use.
Dimensions of suitable nuts are also given and illustrated
in Fig. 16.1(b).
Included in Table 16.1 and shown in Fig. 16.1(c)
are typical washers to suit the above bolts and nuts
and these are covered by BS 4320. Standard washers
are available in two different thicknesses, in steel or
brass, and are normally plain, but may be chamfered.
Table 16.1 gives dimensions of commonly used bolts,
nuts and washers so that these can be used easily on
assembly drawings. For some dimensions maximum
and minimum values appear in the standards and we
have taken an average figure rounded up to the nearest
0.5 mm and this will be found satisfactory for normal
drawing purposes. Reference should be made to the
relevant standards quoted for exact dimensions if
required in design and manufacture.
Manual of
Engineering Drawing
Second edition
Colin H Simmons
I.Eng, FIED, Mem ASME.
Engineering Standards Consultant
Member of BS. & ISO Committees dealing with
Technical Product Documentation specifications
Formerly Standards Engineer, Lucas CAV.
Dennis E Maguire
CEng. MIMechE, Mem ASME, R.Eng.Des, MIED
Design Consultant
Formerly Senior Lecturer, Mechanical and
Production Engineering Department, Southall College
of Technology
City & Guilds International Chief Examiner in
Engineering Drawing
4 comments:
thanks for sharing nice information with us about product design of nuts,bolts,screws and washers. I truly suggest this blogger and helpful for all.
MIG Enterprises is one of the famous screw Suppliers , offering heavy-duty and superlative fasteners at an affordable cost. Visit there and get the best services of bolts and screws.
10. Dittogold is a reliable nut bolt factory. Our expert manufacturing team shows the numbers of the bolt ranges. In Punjab, many proficient and dedicated dealers deal with nut bolt factories. Here we manufactured and customized the nut bolts to make them suitable to use in different industries for different purposes.Manufacturer
https://ssboltnut.com/?utm_source=https%3A%2F%2Fssboltnut.com%2F&utm_medium=Modi+Kushal&utm_id=Modi+Kushal C.P.FASTENERS established in 1995, promoters of STAINLESS STEEL FASTENERS in Gujarat, has pioneered the Manufacturing Marketing of S.S. Fastener by revolutionizing the World of Fixing Solutions creating Rust Free Fixings to resolve the Corrosion Issues in India.
Post a Comment