First angle projection

The other standard orthographic projection method is first angle projection. The only difference between first angle and third angle projection is the position of the views. First angle projection is the opposite to third angle projection. The view, which is seen from the side of an object, is placed on the opposite side of that object as if one is looking through it. Figure 2.13 shows the first angle projection layout of the bracket shown in Figure 2.12. The labelling of the views (e.g. front view, plan, etc.) is identical in Figures 2.12 and 2.13. Note that in first angle projection, the right-side view is not placed on the right-hand side of the front view as in third angle projection but rather on the left-hand side of the front view as shown in Figure 2.13. Similarly, the left-side view appears on the right-hand side of the front view. The other views are similarly placed. A comparison between Figures 2.12 and 2.13 shows that the views are identical but the positions and hence relationships are different. Another first angle projection drawing is seen in the title box in Figure 2.13. This is the truncated cone. It is the standard ISO symbol for first angle projection (ISO 128:1982). It is this symbol which is placed on drawings in preference to the phrase 'first angle projection'. First angle projection is becoming the least preferred of the two types of projection. Therefore, during the remainder of this book, third angle projection conventions will be followed. 

Engineering Drawing for Manufacture
by Brian Griffiths
Publisher: Elsevier Science & Technology Books